SN74CBT3383CPW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | Bus FET Exchange Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 5 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3383 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 2:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 2 |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.3 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3383CPW Overview
In order to conserve board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Bus FET Exchange Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 24 range.The base part number is 74CBT3383, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 24 component pins.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 24 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer contains 2 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The part belongs to the Other Logic ICs category of signal switches.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer has a total of 10 inputs.The signal switching operates with a resistance of 4.This signal switching operates at a resistance of 8Ohm.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT3383CPW Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3383CPW Applications
There are a lot of Texas Instruments SN74CBT3383CPW Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- To select different devices in microprocessor output
- Audio transmission
- GLAN
- HD surveillance system
- Solenoid cooling fan
- Medium scale TV wall
- Control unit of Central Processing unit (CPU)
- Data transfer
- Data collection system
