SN74CBTD1G125DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G125DBVT Overview
Providing this information in the SC-74A, SOT-753 enables digital switch board space to be saved.It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTD series are suitable for a wide range of applications.The basic configuration includes 5 terminations.As its base part number is 74CBTD1G125, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V voltage.Signal switch has 5 component pins.It is the end of conductors that is represented by GULL WING.Single is used as its supply type.It is configured with 5 pins.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 1 bits that are provided.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is the classification for this the digital switch ic.It consumes 1.5mA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The signal switching is packaged by TR. A resistance of 2 governs its operation.It operates with a resistance of 35Ohm.The mux switch configuration consists of 1 elements.The output current of 64mA is provided for higher switches' flexibility.
SN74CBTD1G125DBVT Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G125DBVT Applications
There are a lot of Texas Instruments SN74CBTD1G125DBVT Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- D/A converters
- Microprocessor instruction decoding
- Relay
- A/D converters
- Medical industry
- To select different devices in microprocessor output
- Frequency multiplexing system
- Enabling different functions units in microprocessor instruction decoding
- Enabling block of memory depending on address in memory chips
