SN74CBTD3305CPW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3305 |
| Pin Count | 8 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 150 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.3 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD3305CPW Overview
In order to save board space, digital switch is located in the 8-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CBTD series can be used for a wide range of applications.Among its basic configurations are 8 terminations.The base part number is 74CBTD3305, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 5V is supplied.Currently, this turn signal switch has a total of 8 component pins.A conductor terminates at GULL WING.Its supply type is Single, which is used as the source of power.There are 8 pins on it.It is mounted in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 1 bits available.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1.5mA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The resistance of the signal switching is 2.20Ohm is the resistance at which it operates.This turn signal switch's circuit uses 2 transmission channels.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTD3305CPW Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3305CPW Applications
There are a lot of Texas Instruments SN74CBTD3305CPW Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- High-performance memory systems
- To select different devices in microprocessor output
- Automation system
- RF-based home automation system
- Solenoid cooling fan
- A/D converters
- Data transfer
- Speed control of medern motors
- Logic circuits
