SN74CBTD3384CDBRE4
| Parameters | |
|---|---|
| Propagation Delay | 150 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Current - Output | 64mA |
| Number of Bits | 10 |
SN74CBTD3384CDBRE4 Overview
This is a relatively small item of digital switch that is included in the SSOP in order to save space on the board.It is packaged in the way of Tape and Reel.There are 24 terminations included in its basic configuration.The multiplexer's system works with 5V voltage.There are 24 component pins in this turn signal switch.A conductor terminates at GULL WING.Single is employed as its supply type.A total of 24 pins are configured on this board.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 10 bits.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.2 is the resistance at which it operates.20Ohm is the resistance at which it operates.The maximum operating temperature of 85°C is acceptable for this signal switch.Temperatures of the multiplexer should be kept at -40°C.The device is specified to operate at the maximum supply voltage of 5.5V in accordance with its applicable specification.According to its specifications, the digital swith requires a minimum supply voltage of 4.5V.For its logic, IC BUS DRIVER is used.
SN74CBTD3384CDBRE4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBTD3384CDBRE4 Applications
There are a lot of Texas Instruments SN74CBTD3384CDBRE4 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Code converters
- Electronics industry
- Robotic vehicles
- Solenoid cooling fan
- Encrypted communications system
- Automatic health monitoring systems
- Electronic circuits
- To select different devices in microprocessor output
- Data-routing applications
