SN74CBTLV3126PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTLV3126PWG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the TSSOP.This configuration includes 14 terminations as part of its basic functionality.The multiplexer's system is supplied with a voltage of 2.5V.A component pin count of 14 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Single is employed.This multiplexer ic is configured with 14 pins.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.There are 1 bits in signal multiplexer.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without any external influences, it consumes 10μA current of multiplexer ic at all times.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.This signal switching operates at a resistance of 7Ohm.This turn signal switch's circuit uses 4 transmission channels.Signal switchs at temperatures up to 85°C are acceptable.Temperatures of the multiplexer should be kept at -40°C.The device is specified to operate at the maximum supply voltage of 3.6V in accordance with its applicable specification.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.In addition, BUS SWITCH provides improved characteristics.A logic IC based on BUS DRIVER is employed in this system.
SN74CBTLV3126PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
BUS SWITCH
BUS DRIVER as the logic IC
SN74CBTLV3126PWG4 Applications
There are a lot of Texas Instruments SN74CBTLV3126PWG4 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- VGA
- High-performance memory systems
- Video transmission
- CPU memory location identification
- Implementing boolean functions with multiple variables
- Speed synchronization of multiple motors in industries
- To select different devices in microprocessor output
- Image transmission
- Microprocessor memory systems
