SN74CBTLV3253DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 40Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Operating Supply Current | 10μA |
| Number of Bits | 2 |
| Throw Configuration | SP4T |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.8 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTLV3253DGVR Overview
Digital switch is provided in the 16-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.Cut Tape (CT) represents its packaging.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.Among its basic features are 16 terminations.The base part number is 74CBTLV3253, which can also be used to find its logic switch related parts.The multiplexer is supplied with 2.5V voltage.A component pin count of 16 can be found on this turn signal switch.As a result, conductors end at GULL WING.Single is used as its supply type.Currently, it is configured with a 16 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.As a result, signal multiplexer provides 2 bits.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The turn signal switch has 4 outputs.Without any external influences, it consumes 10μA current of multiplexer ic at all times.In this multiplexer, there is a total of 8 inputs.The switches package is packaged in accordance with the TR method.With a resistance of 40Ohm, it operates.Load stability of the multiplexers can be maintained by delivering 10μA supply voltage.
SN74CBTLV3253DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 10μA
SN74CBTLV3253DGVR Applications
There are a lot of Texas Instruments SN74CBTLV3253DGVR Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Automatic Monitoring systems
- Steel plants
- Computer memory
- Enabling block of memory depending on address in memory chips
- Microprocessor memory systems
- CPU memory location identification
- Arithmetic Logic Units
- Automation system
- Robotic vehicles
