Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
41.900595mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
40Ohm |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Base Part Number |
74CBTLV3257 |
Pin Count |
16 |
Number of Outputs |
2 |
Number of Elements |
1 |
Circuit |
4 x 1:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Channels |
4 |
Operating Supply Current |
10μA |
Throw Configuration |
SPDT |
Propagation Delay |
6.1 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
6.1 ns |
Family |
CBTLV/3B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Height |
1.2mm |
Length |
3.6mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTLV3257DGVR Overview
In order to save board space, digital switch is located in the 16-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.The operating temperature of -40°C~85°C TA will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.Several applications are possible for 74CBTLV series multiplexers.There is a design for terminating 16 as part of its basic configuration.The base part number is 74CBTLV3257, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 2.5V.A component pin count of 16 can be found on this turn signal switch.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.There are 16 pins on it.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.In order for the turn signal switch to work, there are 2 outputs.It consumes 10μA current of multiplexer ic without external influences.TR is used to package the switches.A resistance of 40Ohm is used to operate it.A total of 4 channels are used for transmission in the turn signal switch's circuit.In mux switch configuration, there are 1 elements.Providing the load with a supply voltage of 10μA can maintain stability of the multiplexers.
SN74CBTLV3257DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 10μA
SN74CBTLV3257DGVR Applications
There are a lot of Texas Instruments SN74CBTLV3257DGVR Signal Switches / Multiplexers / Decoders applications.
- VGA
- Medical industry
- Electronic circuits
- Logic circuits
- Injectors
- Used to connect a single source to multiple destinations
- Recording transmission
- Video transmission
- Encrypted communications system
- PCIe