SN74CBTS6800DGVR

24 Terminations4.5V~5.5V 24 Pin 74CBTS6800 Signal switch74CBTS Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTS6800DGVR
Package: 24-TFSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 257
Description: 24 Terminations4.5V~5.5V 24 Pin 74CBTS6800 Signal switch74CBTS Series 1 Functions(Kg)

Details

Tags

Parameters
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TFSOP (0.173, 4.40mm Width)
Number of Pins	24
Weight	60.894776mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBTS
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.4mm
Base Part Number	74CBTS6800
Pin Count	24
Operating Supply Voltage	5V
Circuit	10 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	10
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	6 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	2.5mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTS6800DGVR Overview

This is a relatively small item of digital switch that is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in the manner of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.With the 74CBTS series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 24 as part of its basic configuration.There is a base part number of 74CBTS6800 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.The board has 24 pins configured.Surface Mount is the way it is mounted.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 10 bits in signal multiplexer.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches package is packaged in a way which is consistent with TR.As far as the resistance is concerned, it operates with 2.The resistance of the signal switching is 7Ohm.64mA provides a high degree of switches' flexibility.