SN74GTLP1395PW
| Parameters | |
|---|---|
| Base Part Number | 74GTLP1395 |
| Pin Count | 20 |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Output Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 8.1 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 1 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74GTLP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
SN74GTLP1395PW Overview
Embedded in the 20-TSSOP (0.173, 4.40mm Width) package, it is available for you to use.The package is in the form of Tube.This output is configured with Tri-State, Inverted.Mixed Signal is the translator type of this electrical device.Surface Mount is the method used for mounting this electronic part.Bidirectional is the type of channel for this electrical device.Operation is performed at -40°C~85°C TA.A transmission line can be terminated with 20 terminations.Parts related to a base part number 74GTLP1395 are designated by the same number.A supply voltage of 3.3V is used to power the device.With 20 pins, it is equipped with a minimal number of connections.The device is part of the 74GTLP series.In addition, it is designed with a pin number of 20.Electronic parts with 1 bits are designed for this application.3.45V is the maximum voltage it supports.The minimal supply voltage is 3.15V.Surface Mount is used for mounting.There are no channels.In Bus Driver/Transceivers, you will find this part.There is a logic IC BUS TRANSCEIVER used in the system.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.The output current of 100mA gives it maximum flexibility in design.If the supply voltage is kept at 3.3V, a high level of efficiency can be achieved.
SN74GTLP1395PW Features
20-TSSOP (0.173, 4.40mm Width) package
20 pin count
74GTLP series
20 pins
SN74GTLP1395PW Applications
There are a lot of Texas Instruments SN74GTLP1395PW voltage translators & level shifters applications.
- Notebook
- Eliminate slow or noisy input signals
- Handset
- Desktop PC
- Driving indicator LEDs or buzzers
- Monitors
- LCD Panels Using GIP / GOA / ASG Technology
- UART
- Motor Drives
- Routers (Telecom Switching Equipment)
