SN74GTLPH306DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLPH306 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Output Current | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLPH306DGVR Overview
24-TFSOP (0.173, 4.40mm Width) contains it.Cut Tape (CT) is the way in which it is packaged.Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Mixed Signal is the translator type of this electrical device.Mounting this electronic component follows the Surface Mount method.A Bidirectional channel type is associated with this electrical device.Operation is performed at -40°C~85°C TA.Due to its superior flexibility, it uses 1 circuits.A transmission line can be terminated with 24 terminations.A series of related parts can be derived from the base part number 74GTLPH306.Level translators is powered by a 3.3V supply.24 pins are present on this board.Level translators is a type of FPGA belonging to the 74GTLPH series.There are 24 pins on it.An electronic part with 8 bits is designed.There is a maximum voltage of 3.45V supported.With a minimum supply voltage of 3.15V, it operates.In Bus Driver/Transceivers, this part is included.A BUS TRANSCEIVER logic IC is used.2 terminations are possible, which each match the transmission line's characteristic impedance.The device's reliable performance makes it a good choice for TR.If the supply voltage is kept at 50mA, a high level of efficiency can be achieved.High efficiency requires a supply voltage of 3.3V.Level shifter is possible to achieve a frequency of 175MHz.
SN74GTLPH306DGVR Features
24-TFSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
74GTLPH series
24 pins
SN74GTLPH306DGVR Applications
There are a lot of Texas Instruments SN74GTLPH306DGVR voltage translators & level shifters applications.
- Controlled Baseline
- Product Traceability
- Products With Many I
- Controlled Baseline
- Eliminate Slow or Noisy Input Signals
- Automotive
- Public Signage
- One Assembly
- Telecom
- Data and Clock Transmission Over Backplane
