SN74GTLPH306PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLPH306 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Output Current | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLPH306PWR Overview
In the package 24-TSSOP (0.173, 4.40mm Width), it can be found.Tape & Reel (TR) is the way it is packaged.This output uses Tri-State, Non-Inverted.Level translators has the translator type Mixed Signal.Mounting this electronic component follows the Surface Mount method.Electrical device with type Bidirectional channel.Level translators is -40°C~85°C TA at the operating temperature.Transmission lines can be terminated using 24 terminations to end them.A base part number 74GTLPH306 indicates the related parts.A supply voltage of 3.3V powers it.A total of 24 pins are included.This is a device from the 74GTLPH series.In addition, it is designed with a pin number of 24.This electronic part is designed with 8 Bits.3.45V is the maximum voltage it supports.There is a minimum supply voltage of 3.15V for it.This electronic part is mounted in the way of Surface Mount.In Bus Driver/Transceivers, you will find this part.BUS TRANSCEIVER is the logic IC it uses.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Based on its reliable performance, this device is suitable for TR.Featuring a 50mA output current, its design flexibility is maximized.In order to achieve high efficiency, the supply voltage should be kept at 3.3V.As far as this device is concerned, it contains 1 elements.The frequency that can be achieved is 175MHz.
SN74GTLPH306PWR Features
24-TSSOP (0.173, 4.40mm Width) package
24 pin count
74GTLPH series
24 pins
1 elements
SN74GTLPH306PWR Applications
There are a lot of Texas Instruments SN74GTLPH306PWR voltage translators & level shifters applications.
- One Assembly and Test Site
- Telecom
- Electronic Points of Sale
- Routers (routing equipment)
- SMBus
- MDIO
- Monitors
- Desktop PC
- Controlled Baseline
- One Fabrication Site
