SN74HC163IPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 270 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 25000000Hz |
| Count Rate | 36MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC163IPWRG4Q1 Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. This configuration uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. In this diagram, there are 1elements that are interconnected by wires. All component pins are equal to 16. Tape & Reel (TR)is the packaging method used for this package. In the circuit, there are 16pins that connect other parts. It is mounted in the manner of [0]. In this case, it emerges as a member of the HC/UH family. With its Automotive, AEC-Q100, 74HCseries designation, it can be used for a range of applications. It is decided to use the logic type [0]. It is recommended to set the operating temperature to -40°C~85°C. There is a mounting type of Surface Mounton this device. Providing a voltage of 2V~6Vensures higher reliability of operation. The array stores 4bits in each element. Based on Pbfree code, this may result in yes. Among its base part number [0], you will find additional parts that are related. Its packaging is provided by [0]. There is 2/6V voltage comes from the voltage source. To operate, the device requires a voltage of [0]. A voltage of 2V is the minimum supply voltage (Vsup). It is possible to supply voltages up to 6V volts (Vsup).
SN74HC163IPWRG4Q1 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
SN74HC163IPWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC163IPWRG4Q1 Counters & Dividers applications.
- Binary counter/decoder
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARING
- Communications Digital Frequency Synthesizers;
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Timers
- Time-delay circuits
- Time delay circuits
- VHF, UHF, FM, AM, etc.
- ALGEBRAIC COMPUTATION
