SN74HC165QPWRG4Q1
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | SISO OPERATION ALSO AVAIALABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
SN74HC165QPWRG4Q1 Overview
16-TSSOP (0.173, 4.40mm Width) package contains the device. It sums up to 16 where the chip's terminations add up. It is packed in a case number Tape & Reel (TR). This part has an operating supply voltage of 5V. A total of 1 elements are present on this part. It is equipped with a pin count of 16. Using Surface Mount as a mount point is recommended. Electronic components belong to the HC/UH group. The component is positioned in the way of Surface Mount. -40°C~125°C is the operating temperature range. There is a voltage supply within 2V~6V. This electrical component belongs to the Automotive, AEC-Q100, 74HC series. The 74HC165 family can be used to find similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAIALABLE. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. In the device, there are 9 input lines. Voltage can be delivered at 2/6V by the device. This part requires a maximum supply voltage (Vsup) of 6V. A quiescent current of 8μA is used to run the device. The part is packaged in the way of TR.
SN74HC165QPWRG4Q1 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Quiescent Current at 8μA
Packing Method : TR
SN74HC165QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC165QPWRG4Q1 Shift Registers applications.
- store data in digital form
- 8-bit data storage
- Generate time delay toward digital circuits
- Interconnectors
- Parallel data
- LED matrix control
- Remote control holding register
- Sequence generator
- Data Format Converters
- Counter
