SN74HC166DRG4
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 190 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
SN74HC166DRG4 Overview
This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). 16 is the sum of the number of terminations in the chip. A Tape & Reel (TR) case is used to pack it. The part operates at 5V voltage. 1 elements are present in this part. 16 pins are available on the device. Using Surface Mount as a mount point is recommended. It is a component of the HC/UH. Mounted in the same way as Surface Mount. The operating temperature ranges -40°C~85°C. Votage is supplied within 2V~6V. This electrical component belongs to the 74HC series. Similar parts can be found using the 74HC166 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. There should be no voltage less than 2V at the minimum supply voltage (Vsup). There are 9 input lines available in the device. Voltage can be delivered at 2/6V by the device. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. There is a TR packaging for the part.
SN74HC166DRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
SN74HC166DRG4 Applications
There are a lot of Texas Instruments SN74HC166DRG4 Shift Registers applications.
- 8-bit data storage
- Output expansion
- Pattern Recognizers
- Remote control holding register
- temporary data storage
- Sequence generator
- Delay Line
- Serial-to-parallel data conversion
- Parallel data
- Pseudo Random Pattern Generator
