banner_page

SN74HC257PW

16 Terminations2V~6V 16 Pin 74HC257 Signal switch74HC Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC257PW
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 275
  • Description: 16 Terminations2V~6V 16 Pin 74HC257 Signal switch74HC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74HC257
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Propagation Delay 26 ns
Family HC/UH
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Supply Type Single
Bandwidth 28MHz
Output Polarity TRUE
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC257PW Overview


Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is packaged in the manner of Tube.The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.With the 74HC series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 16 as part of its basic configuration.To find signal switch's related components, a base part number of 74HC257 may also be used.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of HC/UH.In this signal multiplexer, there are 2 bits that are provided.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.This turn signal switch has 1 outputs designed for its operation.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.It has 8 inputs.A total of 4 channels are used for transmission in the turn signal switch's circuit.

SN74HC257PW Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

SN74HC257PW Applications


There are a lot of Texas Instruments SN74HC257PW Signal Switches / Multiplexers / Decoders applications.

  • Data demultiplexing
  • Implementing boolean functions with multiple variables
  • Injectors
  • Paper plants
  • Control unit of Central Processing unit (CPU)
  • Night vision cameras
  • Enabling different functions units in microprocessor instruction decoding
  • Time division multiplexing system
  • Make half adder
  • Microprocessor instruction decoding

Write a review

Note: HTML is not translated!
    Bad           Good