SN74HC393PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 60MHz |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 360 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC393PWRE4 Overview
In the TSSOPpackage, it is supplied. It is configured using 14terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. 2 elements are interconnected in wires. All component pins are equal to 14. Tape & Reel (TR)is used to package it. In the circuit, there are 14pins that connect other parts. It is mounted in the manner of [0]. The HC/UHfamily is derived from it. As far as the device is concerned, there are 4bits of information. The result may be yeswhen expressing the result in Pbfree code. The device is manufactured at INDUSTRIALdegrees Celsius. Its packaging is provided by [0]. To operate, it requires a supply voltage of 5V volts. Electrical characteristics are acceptable at extended periods of time at temperatures above [0]. Generally, the temperature range of the device is set at -40°C. In this case, the frequency is 60MHz Hz. 6Vis the maximum voltage the device can handle. The device can operate at as low a voltage as 2V.
SN74HC393PWRE4 Features
Embedded in the TSSOP package
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393PWRE4 Applications
There are a lot of Texas Instruments SN74HC393PWRE4 Counters & Dividers applications.
- Frequency dividers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Decade counter/decimal decode display (CD4017B）
- Timing applications
- Binary counter/decoder
- Programmable decade counters
- counting/frequency sy nthesizers-BCD output
- Control counters
- Time delay circuits
- Signal gating
