SN74HC4060D
| Parameters | |
|---|---|
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
SN74HC4060D Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. There are 16terminations used for configuring it. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. There are 1 terminations on the device. There are a total of 16 pins in all components. Tubeis used to package it. Circuit components are connected by 16pins. To mount it, use the method of [0]. The HC/UHfamily includes it. This device is a member of the 74HCseries and is well suited for a wide range of applications. Binary Counteris adopted as the logic type. A temperature of -40°C~85°Cshould be set for the operating environment. This device is mounted in a Surface Mountmanner. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. The array contains elements containing 14bits each. Pbfree code may produce the result yes. You can find more related parts under its base part number of 74HC4060. As a result of the voltage source, there is 2/6V voltage. The device requires a supply voltage of [0]. The minimum supply voltage (Vsup) is as low as 2V. It operates with the frequency of 53MHz. A maximum supply voltage (Vsup) is available up to 6V.
SN74HC4060D Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060D Applications
There are a lot of Texas Instruments SN74HC4060D Counters & Dividers applications.
- SQUARE ROOT
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- LINEARIZATION
- Signal gating
- Analog multiplexing and demultiplexing
- Fixed and programmable counters greater than 10
- DIVISION
- Divide-by-N counting
- Counter control/timers
- Binary counter/decoder
