SN74HC573ADWRG4
| Parameters | |
|---|---|
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Turn On Delay Time | 23 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 44 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
SN74HC573ADWRG4 Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. There is D-Type Transparent Latch logic type for this electrical device. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 2V~6V. It operates at -40°C~85°C degrees Celsius. 74HC is the series number of this FPGA. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. It is a member of the 74HC573 family. A 5V voltage supply is required for operation. With 20 pins, it is equipped. This electronic device is categorized as a HC/UH electronic device. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. FF/Latches is the subcategory of this part. The maximal supply voltage (Vsup) reaches 6V. 2/6V power supplies are needed to operate it. The supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 8 input lines. This device is well suited for TR based on its reliable performance. With an output current of 7.8mA, it is highly flexible in terms of design. A high efficiency supply voltage should be maintained at 5V. There are also characteristics of BROADSIDE VERSION OF 373 associated with it.
SN74HC573ADWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573ADWRG4 Applications
There are a lot of Texas Instruments SN74HC573ADWRG4 Latches applications.
- Relay
- Shift Registers
- Watches
- Shift left register
- Buffer/Storage Registers
- Phase comparator
- Automotive ADAS
- Clocks
- Flip-flops
- Shift right with parallel loading
