SN74HC594DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Input Current | 1μA |
| Number of Output Lines | 10 |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC594DW Overview
As a result, 16-SOIC (0.295, 7.50mm Width) package contains the embedded device. A total of 16 terminations can be found on the chip. A Tube case is used to pack it. The part operates at 5V voltage. There are 1 elements on this part. There are 16 pins on the device. The mounting method should be Surface Mount. There is an electronic component in the HC/UH. Mounted in the same way as Surface Mount. There is a temperature range of -40°C~85°C. Voltages within 2V~6V are supplied to the device. In this case, the electrical component belongs to the series 74HC. You can search for similar parts based on the 74HC594 family. In terms of supply voltage, this chip operates within the range of 5V. This part should have a minimum supply voltage (Vsup) of at least 2V. Voltage can be delivered at 2/6V by the device. In this part, the maximum supply voltage (Vsup) should not exceed 6V. There are 10 output lines to operate. There are 4 circuits in this device.
SN74HC594DW Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
SN74HC594DW Applications
There are a lot of Texas Instruments SN74HC594DW Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- temporary data storage
- Serial-to-parallel data conversion
- Remote control holding register
- Parallel data
- Serial-to-parallel data conversion
- Flash Memory
- Generate time delay toward digital circuits
- Pattern Recognizers
- Interconnectors
