SN74HC595DBRG4
| Parameters | |
|---|---|
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
SN74HC595DBRG4 Overview
As a result, 16-SSOP (0.209, 5.30mm Width) package contains the embedded device. This chip has a total termination count of 16. It is used to pack in Tape & Reel (TR) case. The part's operating supply voltage is rated 5V. Devices with 16 pins are available. Surface Mount is recommended for mounting. An electronic component is included in the HC/UH. Its mounting method is Surface Mount. Operating temperatures are within the range of -40°C~85°C. Votage within 2V~6V is supplied. 74HC is the series number of this electrical component. With 74HC595 family search, you can find similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There should be no voltage less than 2V at the minimum supply voltage (Vsup). There are 1 input lines available in the device. There is a possibility of delivering voltage at 2/6V. This part should not have a supply voltage (Vsup) greater than 6V. There are 9 output lines to operate. There is a TR packaging for the part.
SN74HC595DBRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595DBRG4 Applications
There are a lot of Texas Instruments SN74HC595DBRG4 Shift Registers applications.
- 7-segment display control
- Counter
- Pseudo Random Pattern Generator
- store data in digital form
- 8-bit data storage
- Output expansion
- Sequence generator
- Serial-to-parallel data conversion
- Data Processors
- Pulse Extenders
