SN74HC682DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Max Supply Current | 700μA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 47 ns |
| Family | HC/UH |
| Logic IC Type | MAGNITUDE COMPARATOR |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC682DWG4 Overview
Packaging made from Rail/Tube's materials.There is no doubt that the SOIC is well known in the electronic industry due to its low package cost.8 Bits were used to design this electronic part.20 is used for terminating programs.The device is equipped with 1 functions.5V is the supply voltage.This device has a 20 Pin Count.During the signal interface of a computer or other device, there can be 20 pins, which are pronged contacts.Electronic part mounted in Surface Mount-direction.Electronic devices of this type are known as HC/UH devices.Subcategory Arithmetic Circuits contains it.There are several additions, including WITH PULL-UP RESISTORS ON B INPUTS; WITH A = B & A > B OUTPUTS.During operation, it will supply no more than 700μA watts of current.Comparator is necessary to maintain a 5V supply voltage.In order to ensure its reliability, the maximum Operating Temperature is set at 85°C.Comparator should result in a warmer temperature than -40°C.The maximal Supply Voltage of 6V is supported by it.2V is the minimum supply voltage required for the system to operate.-5.2mA is the high-level output current.Current at low levels is set to 5.2mA.There is a logic IC called MAGNITUDE COMPARATOR that it uses.There is an output configured with TTL.
SN74HC682DWG4 Features
SOIC package
8 Bits
20 terminations
1 Functions
20 pin count
the maximal supply voltage of 6V
SN74HC682DWG4 Applications
There are a lot of Texas Instruments SN74HC682DWG4 applications of comparators.
- Process contollenr
- Servo motor controls
- Companion Appliceation Nole, ICAN-6374, "Application of the CMOS CD4059A Programmable Divide-by-N Counter in FM and Ctizens Band Transceiver Digital Tuners"
- Servo Motor Controls
- “Time out" timer for consume-appication industrial controls
- Fixed or programmable irequency division
- Communications digltal frequency synthesizers: VHF, UHF, FM, AM, etc.
