SN74HCT373PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT373PWR Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. This package has the format of Cut Tape (CT). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. The 74HCT series contains FPGAs of this type. With this electronic part, there are 8 bits. This device has 20 terminations. It belongs to 74HCT373 family. In order to function, the supply voltage should be set to 5V. The device is equipped with 20 pins. This electronic device is categorized as a HCT electronic device. In addition, it is designed with a pin number of 20. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. There are 3 input lines in which electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TR. The output current of 6mA makes it feature maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. Without external influences, it consumes 8μA quiescent current.
SN74HCT373PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
SN74HCT373PWR Applications
There are a lot of Texas Instruments SN74HCT373PWR Latches applications.
- Motor Drives
- PCs and Notebooks
- Phase comparator
- Shift left with parallel loading
- Serial Input
- Synchronous frequency dividers
- Data acquisition
- BCD counting
- Buffer/Storage Registers
- Control circuits
