banner_page

SN74LS148DG4

16 Terminations4.75V~5.25V 16 Pin 74LS148 Signal switch74LS Series 3 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LS148DG4
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 586
  • Description: 16 Terminations4.75V~5.25V 16 Pin 74LS148 Signal switch74LS Series 3 Outputs1 Functions(Kg)

Details

Tags

Parameters
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74LS
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Priority Encoder
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Arithmetic Circuits
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74LS148
Pin Count 16
Number of Outputs 3
Operating Supply Voltage 5V
Circuit 1 x 8:3
Power Supplies 5V
Number of Bits 8
Propagation Delay 13 ns
Turn On Delay Time 55 ns
Family LS
Logic Function Multiplexer
Number of Inputs 8
Current - Output High, Low 400μA 8mA
Supply Type Single
Bandwidth 35MHz
Output Polarity INVERTED
Power Supply Current-Max (ICC) 60mA
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.58mm
Length 9.9mm
Width 3.91mm

SN74LS148DG4 Overview


Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tube.The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Priority Encoder is used.When the operating temperature is kept at 0°C~70°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.75V~5.25V supply voltage.Multiplexers in the 74LS series are suitable for a wide range of applications.Among its basic features are 16 terminations.As its base part number is 74LS148, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.A component pin count of 16 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.A total of 16 pins are configured on this board.The mounting point is Surface Mount.The logic switch is a member of the LS family.The multiplexer ic provides 8 bits.In order for 5V to operate normally, a power supply is provided.In order for the turn signal switch to work, there are 3 outputs.The digital switch ic is a part of an electronic system classified as Arithmetic Circuits.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A multiplexer such as this has 8 inputs available.

SN74LS148DG4 Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74LS148DG4 Applications


There are a lot of Texas Instruments SN74LS148DG4 Signal Switches / Multiplexers / Decoders applications.

  • HD surveillance system
  • Paper plants
  • Enabling different functions units in microprocessor instruction decoding
  • To select different devices in microprocessor input
  • A robotic vehicle with the metal detector
  • Data distribution
  • CPU memory location identification
  • HDMI applications
  • To select different devices in microprocessor output
  • Transmission from the computer system of a satellite

Write a review

Note: HTML is not translated!
    Bad           Good