SN74LS151N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74LS151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 6mA |
| Power Dissipation | 30mW |
| Number of Bits | 16 |
| Propagation Delay | 38 ns |
| Quiescent Current | 6mA |
| Family | LS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Voltage Supply Source | Single Supply |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS151N Overview
This is a relatively small item of digital switch that is included in the 16-DIP (0.300, 7.62mm) in order to save space on the board.The package is packaged in the manner of Tube.As far as mounting is concerned, digital switch ic uses Through Hole.As the analog part, the circuit uses an analog IC Multiplexer.The operating temperature of 0°C~70°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.75V~5.25V supply voltage.The multiplexers from 74LS series can be used for a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number of 74LS151 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 16 component pins.In this case, the supply type is Single.A configuration of 16 pins is used.It is mounted in the way of Through Hole.The logic switch is a member of the LS family.In this signal multiplexer, there are 16 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 5V.In order for the turn signal switch to work, there are 1 outputs.It consumes 6mA current of multiplexer ic without external influences.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has 8 inputs.To operate the digitalswitch normally, 1 circuits are formed.
SN74LS151N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74LS151N Applications
There are a lot of Texas Instruments SN74LS151N Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Paper plants
- War field flying robot with a night vision flying camera
- PCIe
- Data distribution
- Implementing boolean functions with multiple variables
- Injectors
- Microprocessor instruction decoding
- Automation system
- Solenoid cooling fan
