SN74LS595DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SERIAL OUTPUT PIN FOR CASCADING |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 38 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS595DRG4 Overview
SOIC is a package containing the embedded device. It sums up to 16 where the chip's terminations add up. Presented in a case of Tape and Reel. Voltage rating of the part is 5V. A total of 1 elements are present on this part. In this device, there are 16 pins. Mounting by Surface Mount is recommended. There is an electronic component in the LS. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: SERIAL OUTPUT PIN FOR CASCADING. It can deliver voltage at 5V. It has 8 bits in total. 16 pins are present on it. It should be used below 70°C. In order to operate the device, the value should not fall below 0°C. It is used under the 5.25V supply voltage. It is used at a higher voltage than 4.75V. A total of 9 output lines are available for operation.
SN74LS595DRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74LS595DRG4 Applications
There are a lot of Texas Instruments SN74LS595DRG4 Shift Registers applications.
- Sequence generator
- Output expansion
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- LED matrix control
- Pattern Recognizers
- Generate time delay toward digital circuits
- Remote control holding register
- Parallel data
- Counter
