SN74LV139ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 26.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 26.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV139ADR Overview
It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74LV series multiplexers.There are 16 terminations included in its basic configuration.Its logic switch base part number is 74LV139 which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 16 pin configuration.The mount is in Surface Mount.The logic switch belongs to the family of LV/LV-A/LVX/H.There are 4 bits in signal multiplexer.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.There is a power supply provided for the mux switch's normal operation of 3.3V.The turn signal switch has 4 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.It consumes 20μA current of multiplexer ic without external influences.The switches package is packaged in accordance with the TR method.This mux switch configuration has 2 elements.
SN74LV139ADR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LV139ADR Applications
There are a lot of Texas Instruments SN74LV139ADR Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- Textile mills
- VGA
- Automatic health monitoring systems
- Signal router
- Make half adder
- Night vision cameras
- PCIe
- Make full adder
- LVDS
