SN74LV164ARGYRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 14 |
| Weight | 32.205058mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 40000000Hz |
| Length | 3.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV164ARGYRG4 Overview
VQFN package contains the device. 14 is the number of terminations on the chip. It is used to pack in Tape and Reel case. Its operating supply voltage is rated at 2.5V. On this part, there are 1 elements. Devices with 14 pins are available. It is recommended that the mount should be done by Surface Mount. An electronic component is included in the LV/LV-A/LVX/H. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: AND-GATED SERIAL INPUTS (A AND B). This device has 2 input lines available. This board has 14 pins in total. Using it below 85°C is recommended. It should not be less than -40°C when operating this device. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 2V.
SN74LV164ARGYRG4 Features
With 14 pins
Operate supply voltage at 5V
SN74LV164ARGYRG4 Applications
There are a lot of Texas Instruments SN74LV164ARGYRG4 Shift Registers applications.
- Serial-to-parallel data conversion
- Counter
- Generate time delay toward digital circuits
- Remote control holding register
- Delay Line
- Output expansion
- Remote control holding register
- Data manipulation
- Pulse Extenders
- data transfer
