SN74LV166ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 40.001177mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV166 |
| Function | Parallel or Serial to Serial |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 11.9 ns |
| Turn On Delay Time | 26 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 35000000Hz |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV166ADGVR Overview
This device can be found embedded within the package 16-TFSOP (0.173, 4.40mm Width). 16 is the number of terminations on the chip. Cut Tape (CT) is the case in which it is packed. Voltage rating of the part is 2.5V. In this device, there are 16 pins. Surface Mount is recommended for mounting. Electronic components are categorized as LV/LV-A/LVX/H. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is -40°C~85°C. Votage is supplied within 2V~5.5V. The 74LV series contains this electrical component. The 74LV166 family can be used to find similar parts. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. The device has a total of 9 input lines. A voltage of 3.3V is possible with this device. There is a TR packaging for the part. It is equipped with 1 outputs.
SN74LV166ADGVR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV166 family
Operate supply voltage at 5V
It supplies 3.3V power
Packing Method : TR
SN74LV166ADGVR Applications
There are a lot of Texas Instruments SN74LV166ADGVR Shift Registers applications.
- Interconnectors
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Remote control holding register
- data transfer
- Data Format Converters
- Pseudo Random Pattern Generator
- temporary data storage
- Serial-to-parallel data conversion
- Pattern Recognizers
