SN74LV175ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 4 |
| Clock Frequency | 165MHz |
| Propagation Delay | 9.3 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 3.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.4pF |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV175ANSR Overview
It is embeded in 16-SOIC (0.209, 5.30mm Width) case. You can find it in the Cut Tape (CT)package. There is a Differentialoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 74LVseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 165MHz. D latch consists of 1 elements. A total of 16 terminations have been made. The 74LV175 family contains it. Power is provided by a 2.5V supply. Input capacitance of this device is 1.4pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part mounted in the way of Surface Mount. There are 16pins on it. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 4. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be above 2V. 4 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TR. An electrical current of 3.3V volts is applied to it. In addition to its maximum design flexibility, the output current of the T flip flop is 12mA. There are 2 output lines on it. 20μAquiescent current consumed.
SN74LV175ANSR Features
Cut Tape (CT) package
74LV series
16 pins
4 Bits
3.3V power supplies
SN74LV175ANSR Applications
There are a lot of Texas Instruments SN74LV175ANSR Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Data Synchronizers
- Matched Rise and Fall
- Communications
- Computing
- Power down protection
- Automotive
- Pattern generators
- Divide a clock signal by 2 or 4
- Registers
