SN74LV374ATDW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 19.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV374ATDW Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tubecontains it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74LV series. A frequency of 150MHzshould be the maximum output frequency. A total of 1elements are present in it. It consumes 2μA of quiescent current without being affected by external factors. There are 20 terminations,The 74LV374family includes it. Power is provided by a 2.5V supply. JK flip flop input capacitance is 4pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 8. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility is achieved through the use of 8 circuits. It operates from 3.3V power supplies. A total of 2ports are embedded in the D flip flop. The output current of 16mA makes it feature maximum design flexibility. This input has 2lines in it.
SN74LV374ATDW Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATDW Applications
There are a lot of Texas Instruments SN74LV374ATDW Flip Flops applications.
- Latch
- Frequency Dividers
- Data Synchronizers
- Communications
- Shift registers
- Counters
- Single Down Count-Control Line
- Digital electronics systems
- Circuit Design
- Convert a momentary switch to a toggle switch
