SN74LV4051ATDWRQ1

14ns, 14ns 75Ohm DUAL Analog Switches 74LV4051 16 Pins 100nA 2.3V 16-SOIC (0.295, 7.50mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LV4051ATDWRQ1
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: -
Stock: 705
Description: 14ns, 14ns 75Ohm DUAL Analog Switches 74LV4051 16 Pins 100nA 2.3V 16-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Number of Pins	16
Weight	420.395078mg
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	75Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Base Part Number	74LV4051
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3.3V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	20μA
Propagation Delay	7 ns
Turn On Delay Time	20 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	35MHz
Supply Current-Max (Isup)	0.02mA
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	75Ohm
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	45 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 23.4pF
On-state Resistance Match-Nom	2.1Ohm
Switch Time (Ton, Toff) (Max)	14ns, 14ns
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Switch-on Time-Max	25ns
Switch-off Time-Max	25ns
Voltage - Supply, Single (V+)	2V~5.5V
Signal Current-Max	0.05A
Height	2.65mm
Length	10.3mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LV4051ATDWRQ1 Overview

The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~105°C TA. Totally, there are 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. Circuits number 1 make up this analogue multiplexer. Use 74LV4051 to search for variants of the digital switches. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 20μA current would be sufficient. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. It is possible to operate 8 inputs. The data can be transferred over a wide range of bandwidths, called 35MHz bandwidths. From the Automotive, AEC-Q100 series.