SN74LV573ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ANSR Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. A Tape & Reel (TR) package is used to package it. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. The supply voltage of the device is 2V~5.5V. There is -40°C~85°C operating temperature. The 74LV series is associated with this FPGA. The electronic part in this image has 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74LV573 family, it falls under that category. A 2.5V voltage supply is required for operation. The 20 pind are equipped with it. There is a device in this electronic family called LV/LV-A/LVX/H. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. The system is powered by 3.3V sources. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. It contains 8 input lines where electronic circuits are present. The reliability of this device makes it well suited to TR. The 16mA output current gives it maximum design flexibility. A maximal power current (ICC) is generated for its operation at 0.02mA.
SN74LV573ANSR Features
20-SOIC (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573ANSR Applications
There are a lot of Texas Instruments SN74LV573ANSR Latches applications.
- Hammer
- Address register
- Pattern generators
- Parallel data storage
- Parallel Input
- Relay
- Up/down difference counting
- Counters
- Serial Input
- Automotive ADAS
