SN74LV574ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 10.6 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.8pF |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV574ADBR Overview
It is embeded in 20-SSOP (0.209, 5.30mm Width) case. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74LV series. Its output frequency should not exceed 175MHz Hz. The list contains 1 elements. There have been 20 terminations. You can search similar parts based on 74LV574. Power is supplied from a voltage of 2.5V volts. The input capacitance of this JK flip flopis 1.8pF farads. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 8 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. This flip flop has a total of 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 16mA. Currently, there are 3 lines of input. It consumes 20μA of quiescent current without being affected by external factors.
SN74LV574ADBR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
SN74LV574ADBR Applications
There are a lot of Texas Instruments SN74LV574ADBR Flip Flops applications.
- Instrumentation
- Supports Live Insertion
- Event Detectors
- Single Up Count-Control Line
- Synchronous counter
- Differential Individual
- Count Modes
- Buffered Clock
- Computing
- Frequency Divider circuits
