SN74LV594APWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 45MHz |
| Base Part Number | 74LV594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 19 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 20μA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV594APWT Overview
There is an embedded device in the package 16-TSSOP (0.173, 4.40mm Width). A total of 16 terminations can be found on the chip. It is used to pack in Tape & Reel (TR) case. 2.5V is the part's operating supply voltage. A total of 1 elements can be found on this part. There are 16 pins on the device. Surface Mount is recommended for mounting. Electronic components are categorized as LV/LV-A/LVX/H. The component is positioned in the way of Surface Mount. -40°C~85°C is the operating temperature range. Votage is supplied within 2V~5.5V. This electrical component belongs to the 74LV series. By using the 74LV594 family, you can find similar parts. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED. There must be a minimum supply voltage (Vsup) of 2V for this part. Devices with voltage delivery capabilities of 2.5/5V are available. Ideally, the maximum supply voltage (Vsup) should not exceed 5.5V. The total number of IC chip bits is 8. There are 8 circuits in this device. TR is the way the part is packaged. The device runs its frequency at 45MHz.
SN74LV594APWT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV594 family
It supplies 2.5/5V power
Packing Method : TR
SN74LV594APWT Applications
There are a lot of Texas Instruments SN74LV594APWT Shift Registers applications.
- store data in digital form
- 8-bit data storage
- Output expansion
- Serial to parallel converter
- Pseudo Random Pattern Generator
- Flash Memory
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers
- Data manipulation
- Counter
