SN74LVC112APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, Flip-Flop, JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 5.9 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC112APWE4 Overview
The item is packaged in TSSOPcases. A total of 2elements are present in it. A total of 16terminations have been recorded. It is powered by a voltage of 1.8V . It is a member of the LVC/LCX/Zfamily of D flip flop. It is mounted in the way of Surface Mount. A total of 16pins are provided on this board. Its clock edge trigger type is Negative Edge. This RS flip flops is a part number FF/Latches. As a result of its reliability, this D flip flop is ideally suited for TUBE. Currently, there are 3 lines of input. A -24mAvalue is set for the high level output current. In the low level output current setting, the current is set to 24mA. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 1.65VV. It supports a maximum supply voltage of 3.6V volts. It is possible to obtain a frequency of 150MHz. This logic IC is J-K FLIP-FLOP. There are 2 functions associated with the JK flip flop. The JK flip flop has a pin count of 16. Its output current of 24mA allows for maximum design flexibility.
SN74LVC112APWE4 Features
16 pins
2 Functions
16 pin count
SN74LVC112APWE4 Applications
There are a lot of Texas Instruments SN74LVC112APWE4 Flip Flops applications.
- Computers
- Consumer
- Counters
- QML qualified product
- 2 – Bit synchronous counter
- Instrumentation
- Frequency Divider circuits
- Data Synchronizers
- Shift registers
- Balanced Propagation Delays
