SN74LVC138ADR
| Parameters | |
|---|---|
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 22 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Max I(ol) | 0.024 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
SN74LVC138ADR Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Cut Tape (CT).For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 1.65V~3.6V, designers have superior flexibility.As a member of 74LVC series, the multiplexers can be used for a wide range of applications.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74LVC138 may also be used.The multiplexer is supplied with 1.8V voltage.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.In the LVC/LCX/Z family, the logic switch is included.There are 8 bits in signal multiplexer.This turn signal switch has 8 outputs designed for its operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.It consumes 10μA current of multiplexer ic without external influences.There are 3 inputs provided in this multiplexer.The switches packaging is based on TR.Normally, the digitalswitch consists of 1 circuits.
SN74LVC138ADR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
SN74LVC138ADR Applications
There are a lot of Texas Instruments SN74LVC138ADR Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Speed control of medern motors
- Memory chips
- Audio transmission
- High-performance memory-decoding applications
- Microprocessor memory systems
- Used to connect a single source to multiple destinations
- Solenoid cooling fan
- Electronic circuits
- Automatic Monitoring systems
