SN74LVC1G374DCKR
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G374 |
| Function | Standard |
| Output Type | Tri-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
SN74LVC1G374DCKR Overview
It is packaged in the way of 6-TSSOP, SC-88, SOT-363. There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 1.65V~5.5V. -40°C~125°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74LVC series. There should be no greater frequency than 175MHzon its output. Terminations are 6. The 74LVC1G374family includes it. Power is supplied from a voltage of 1.8V volts. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. There are 6pins on it. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. The design is based on 1bits. The maximal supply voltage (Vsup) reaches 5.5V. Its superior flexibility is attributed to its use of 1 circuits. Due to its reliability, this T flip flop is well suited for TR. The power supply is 3.3V. This flip flop has a total of 2ports. The 32mA output current allows it to be designed with the greatest amount of flexibility. Quiescent current is consumed by the D latch in the amount of 10μA.
SN74LVC1G374DCKR Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
SN74LVC1G374DCKR Applications
There are a lot of Texas Instruments SN74LVC1G374DCKR Flip Flops applications.
- Balanced 24 mA output drivers
- Counters
- Frequency Divider circuits
- Bounce elimination switch
- EMI reduction circuitry
- Supports Live Insertion
- Communications
- Registers
- Computers
- Guaranteed simultaneous switching noise level
