SN74LVC1T45DCKT
| Parameters | |
|---|---|
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Propagation Delay | 3.9 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 17.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
SN74LVC1T45DCKT Overview
There is an embedded version of it in package 6-TSSOP, SC-88, SOT-363.Packaged as Tape & Reel (TR).In its configuration, Tri-State, Non-Inverted is used as the output.Its translator type is Voltage Level.Surface Mount is used to mount this electronic part.Level translators has the Channel type Bidirectional.A temperature of -40°C~85°C TA is used for operation.0 terminations are used to end transmission lines.Based on this base part number 74LVC1T45, its related parts can be identified.Power comes from a voltage of 1.8V.The device has a pin count of 6.This is a device from the 74LVC series.Level translators has 6 pins.The design of this electronic part is based on 1 bits.The maximum supply voltage is 5.5V.1.65V is its minimum supply voltage.1.65V~5.5V is the configuration of the VCCA supply rail.In the VCCB supply rail, 1.65V~5.5V is configured.With the Surface Mount method, it is mounted.There are a total of 1 channels.I would classify it as part of the group of Bus Driver/Transceivers.Level translators uses a logic IC of type BUS TRANSCEIVER.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.This electronic device is categorized as a LVC/LCX/Z electronic device.Aquiescent current is consumed by 3μA without being affected by external forces.A 3.3V power supply powers it.Considering its reliability, this device is appropriate for TR.If the supply voltage is kept at 32mA, a high level of efficiency can be achieved.
SN74LVC1T45DCKT Features
6-TSSOP, SC-88, SOT-363 package
6 pin count
74LVC series
6 pins
3.3V power supplies
SN74LVC1T45DCKT Applications
There are a lot of Texas Instruments SN74LVC1T45DCKT voltage translators & level shifters applications.
- Industrial Equipment
- Public Signage
- Servers
- Product Traceability
- Tablet PCs
- Temperature Ranges (1)
- Industrial equipment
- Enterprise
- Routers (routing equipment)
- Telecom
