SN74LVC2G53DCUR

4.5ns, 8ns SPDT 13Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC2G53 8 Pins 100nA 2.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC2G53DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 216
Description: 4.5ns, 8ns SPDT 13Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC2G53 8 Pins 100nA 2.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	13Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Base Part Number	74LVC2G53
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Output Current	50mA
Max Supply Current	1μA
Propagation Delay	600 ps
Turn On Delay Time	5.4 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	8 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	13Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	4.5ns, 8ns
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-58dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	13Ohm
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LVC2G53DCUR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). High reliability is ensured by the advanced packaging method Cut Tape (CT). It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 8. By its 2 channels, the electronic component provides high-quality output. A 2.3V voltage supply should turn on and run the electronic component. The electronic part body is injected with 8 pins. Circuits based on SPDT switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. Use 74LVC2G53 to search for variants of the digital switches. As far as internal resistance is concerned, it has 13Ohm. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexers or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. 1.65V is the lowest voltage that should be fed to the electronic electronic part. 1μA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. Putting voltage greater than 1μA on the multiplexer may cause damage. There are 2 inputs to be operated. 300MHz bandwidths enable data to be transferred. Drain to Source resistance for this electronic component is 13Ohm.