SN74LVC373ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC373ADGVR Overview
There is an embedded version of it in package 20-TFSOP (0.173, 4.40mm Width). This package has the format of Tape & Reel (TR). There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. It is -40°C~85°C at the operating temperature. An FPGA of this type belongs to the 74LVC series. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. 74LVC373 is the family name of it. The device works with a voltage of 1.8V for its supply voltage. It is equipped with 20 pin count. LVC/LCX/Z is the family name of this electronic device. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. The maximal supply voltage (Vsup) reaches 3.6V. In the circuit, there are 2 input lines that are constituted by an electronic circuit. As a result of its reliable performance, it is well suited for TR. With an output current of 24mA, it is highly flexible in terms of design. For maximum efficiency, the supply voltage should be set to 3.3V.
SN74LVC373ADGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
SN74LVC373ADGVR Applications
There are a lot of Texas Instruments SN74LVC373ADGVR Latches applications.
- Audio and video switching
- BCD counting
- Communication systems
- Multi-line decoders
- Relay replacement
- Shift register
- TV Set-top Boxes
- Parallel Input
- Stacked or Push-Down Registers
- Counting
