SN74LVC573APWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.9 ns |
| Turn On Delay Time | 2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC573APWT Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. It is packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. It is -40°C~85°C at the operating temperature. 74LVC is the series number of this FPGA. An electronic part with 8 bits is designed. As far as this device is concerned, it has no terminations. The family 74LVC573 includes it. The supply voltage of the device is 3.3V. 20 pins are included. It is part of the family of electronic devices called LVC/LCX/Z. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. The maximal supply voltage (Vsup) reaches 3.6V. A total of 3.3V power supplies are required for it to operate. An electronic circuit can be found on 8 input lines. The device's reliable performance makes it a good choice for TR. Its output current of 24mA ensures maximum design flexibility.
SN74LVC573APWT Features
20-TSSOP (0.173, 4.40mm Width) package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
3.3V power supplies
SN74LVC573APWT Applications
There are a lot of Texas Instruments SN74LVC573APWT Latches applications.
- High-speed logic
- Shift right with parallel loading
- Relay
- Network Switches
- Audio and video switching
- Shift left with parallel loading
- Automatic test equipment
- Avionics
- Parallel data storage
- Registers
