SN74LVC823APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.9 ns |
| Turn On Delay Time | 1.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC823APW Overview
It is packaged in the way of 24-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74LVCseries comprises this type of FPGA. You should not exceed 150MHzin its output frequency. D latch consists of 1 elements. During its operation, it consumes 10μA quiescent energy. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74LVC823, you will find similar parts. It is powered by a voltage of 1.8V . Input capacitance of this device is 5pF farads. This D flip flop belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. 24pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 9bits are used in this part. This D flip flop is equipped with 0 ports. With an output current of 24mA, this device offers maximum design flexibility. There are no output lines on the JK flip flop. A total of 9input lines have been provided. In addition, you can refer to the additinal WITH CLEAR AND CLOCK ENABLE of the D latch.
SN74LVC823APW Features
Tube package
74LVC series
24 pins
9 Bits
SN74LVC823APW Applications
There are a lot of Texas Instruments SN74LVC823APW Flip Flops applications.
- Differential Individual
- Circuit Design
- Dynamic threshold performance
- Shift Registers
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
- ESCC
- Registers
- Shift registers
- Synchronous counter
