SN74LVCC4245APWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 90.009736mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Output Type | Voltage |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 10.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 200 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVCC4245APWTG4 Overview
Package TSSOP includes it.Tape and Reel is the way it is packaged.Level translators is configured wlevel translatorsh an output of Voltage.A transmission line can be terminated with 24 terminations.There is a voltage supply of 3.3V which powers the device.The pin count of this device is 24.The 24 pins are designed into it.Level translators is designed wLevel translatorsh 8 bLevel translatorss.Supports a voltage of 5.5V as its maximum supply voltage.A voltage of 2.7V is the minimum supply voltage required for it to operate.Surface Mount is used for mounting.Bus Driver/Transceivers contains this part.Level translators uses the logic IC BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.Electronic devices like this belong to the family LVC/LCX/Z.The quiescent current consumed by it is 8μA because it is unaffected by external factors.This device runs on a 3.35V power supply.In view of its reliable performance, this device can be considered suitable for TUBE.Level translators is also characterized by TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V.A temperature of at least [0°C] should be used for the operation.Ideally, the temperature should not be higher than 85°C.This device contains 1 elements in its design.In addition to its maximum design flexibility, 24mA features the lowest output current.
SN74LVCC4245APWTG4 Features
TSSOP package
24 pin count
24 pins
3.35V power supplies
1 elements
SN74LVCC4245APWTG4 Applications
There are a lot of Texas Instruments SN74LVCC4245APWTG4 voltage translators & level shifters applications.
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Available in Military (-55°C to 125°C)
- ADAS Fusion
- Enterprise and communications
- Extended Product Life Cycle
- Driving indicator LEDs or buzzers
- Telecom
- Driving Indicator LEDs or Buzzers
- Debouncing a mechanical switch
- Automotive infotainment
