SN74LVCH16374ADGG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 20μA |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16374ADGG Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~125°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. This type of FPGA is a part of the 74LVCH series. A frequency of 150MHzshould not be exceeded by its output. In total, it contains 2 elements. There have been 48 terminations. If you search by 74LVCH16374, you will find similar parts. It is powered from a supply voltage of 3.3V. Its input capacitance is 5pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. It is mounted in the way of Surface Mount. This board is designed with 48pins on it. Its clock edge trigger type is Positive Edge. There are 16bits in its design. 3.6Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 1.65V. A D flip flop with 2embedded ports is available. 20μAquiescent current consumed.
SN74LVCH16374ADGG Features
Tube package
74LVCH series
48 pins
16 Bits
SN74LVCH16374ADGG Applications
There are a lot of Texas Instruments SN74LVCH16374ADGG Flip Flops applications.
- Safety Clamp
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Buffered Clock
- Shift registers
- High Performance Logic for test systems
- Balanced 24 mA output drivers
- Memory
- Asynchronous counter
- Balanced Propagation Delays
