banner_page

SN74LVTH162373DLR

D-Type, Latch 2.7V~3.6V 16 Bits Tri-State Latches 74LVTH Series 74LVTH162373 48 Pins DUAL BICMOS 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVTH162373DLR
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 774
  • Description: D-Type, Latch 2.7V~3.6V 16 Bits Tri-State Latches 74LVTH Series 74LVTH162373 48 Pins DUAL BICMOS 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Weight 600.301152mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LVTH
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology BICMOS
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LVTH162373
Pin Count 48
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 3.3V
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Load Capacitance 50pF
Number of Ports 2
Output Current 12mA
Number of Bits 16
Propagation Delay 3.1 ns
Turn On Delay Time 3.4 ns
Family LVT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 12mA 12mA
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 4.6 ns
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 5mA
Number of Output Lines 16
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.79mm
Length 15.88mm
Width 7.49mm
Thickness 2.59mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LVTH162373DLR Overview


The package in which it is embedded is named 48-BSSOP (0.295, 7.50mm Width). The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 2.7V~3.6V. The operating temperature is -40°C~85°C. This FPGA is part of the 74LVTH series. This electronic part is designed with 16 Bits. A device such as this has 48 terminations designed. It belongs to 74LVTH162373 family. In order to operate it, the supply voltage must be 3.3V. 48 pins are available on it. It is a member of the LVT family of electronic devices. With the design of the board, there are only 48 pins. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. Based on its reliable performance, this device is appropriate for TR. With 12mA, maximum design flexibility is ensured. A high efficiency supply voltage should be maintained at 3.3V. It follows that 16 output lines are generated from the binary equivalent of the input line. 2 elements are present in it. When the maximum power current (ICC) is supplied for its operation, it reaches 5mA.

SN74LVTH162373DLR Features


48-BSSOP (0.295, 7.50mm Width) package
74LVTH series
16 Bits
74LVTH162373 family
48 pin count
48 pins
2 elements

SN74LVTH162373DLR Applications


There are a lot of Texas Instruments SN74LVTH162373DLR Latches applications.

  • Shift left register
  • Multistage ripple counting
  • Automotive Infotainment
  • Counters
  • Counter timers
  • A/D converters
  • Automotive Cluster
  • Stacked or Push-Down Registers
  • Serial Output Data Queuing
  • Avionics

Write a review

Note: HTML is not translated!
    Bad           Good