SN74LVTH16835DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH16835 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 3.5 ns |
| Family | LVT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Driver |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.7 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 5mA |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74LVTH16835DLR Overview
56-BSSOP (0.295, 7.50mm Width) contains this file. Tape & Reel (TR) is how it's packaged. In order to achieve the high level of flexibility that it possesses, 18-Bit circuits are used. There is a logic type Universal Bus Driver associated with this electrical device. In this case, the electronic part is mounted in the direction of Surface Mount. The operating temperature should be higher than -40°C~85°C in order for the machine to function properly. In order to ensure maximum design flexibility, it features a High/Low output current of 32mA 64mA. As part of the 74LVTH series, it is a type of FPGA. There is a supply voltage of 2.7V~3.6V that it operates on. The 74LVTH16835 family is the one that this is part of. Transmission lines can be terminated with 56 terminations by using a device that matches the characteristic impedance. When the supply voltage is above 3.3V, the device will operate normally. It is equipped with 56 pin count. It is designed with 18 Bits. The 2 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. In this case, the electronic part will be mounted in the Surface Mount-direction. A 56-pin is used for its design. The LVT family is made up of a number of electronic devices, one of which is this device, that belong to the genre of electronic devices. Upon reaching 3.6V, the supply voltage (Vsup) reaches its maximum value. There should be a greater supply voltage (Vsup) than 2.7V. Powered by 3.3V power supplies, it runs on a battery. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design. There is a part included in Bus Driver/Transceivers that is similar to this one.
SN74LVTH16835DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74LVTH series
74LVTH16835 family
56 pin count
56 pins
3.3V power supplies
SN74LVTH16835DLR Applications
There are a lot of Texas Instruments SN74LVTH16835DLR Universal Bus Functions applications.
- Induction cooker
- VCR
- Electric car
- Car
- In-vehicle system
- Controller ICs
- Alarm circuit using LDR
- Digital stopwatches
- Photovoltaic grid-connected power system
- Computer
