SN74LVTH245APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH245 |
| Pin Count | 20 |
| Output Type | 3-State |
| Max Output Current | 64mA |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 190μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 7.1 ns |
| Family | LVT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Transceiver, Non-Inverting |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4 ns |
| Control Type | COMMON CONTROL |
| Schmitt Trigger | No |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH245APW Overview
Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74LVTH series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Transceiver shares the LVT family's comprehensive benefits and features. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74LVTH245" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 5mA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. To supply the device, a minimum voltage of 2.7V is a must. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. The typical output current of the logical driver is measured 64mA.
SN74LVTH245APW Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
SN74LVTH245APW Applications
There are a lot of Texas Instruments SN74LVTH245APW Buffers & Transceivers applications.
- Automation systems
- Satellite ground stations
- Cordless telephone
- Point-to-point networking
- Wired telephone
- Carrier phase observations
- Cell phones
- Fiber optic cable connection network
- Fast Ethernet
- TV signal transmission
