SN74S175NSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74S175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Output Current | 20mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 10 ns |
| Family | S |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 96mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 12ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 96mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| RoHS Status | ROHS3 Compliant |
SN74S175NSR Overview
The flip flop is packaged in a case of 16-SOIC (0.209, 5.30mm Width). The package Tape & Reel (TR)contains it. In the configuration, Differentialis used as the output. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. It is at 0°C~70°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. It belongs to the 74Sseries of FPGAs. You should not exceed 110MHzin the output frequency of the device. A total of 1 elements are present. It consumes 96mA of quiescent The number of terminations is 16. The object belongs to the 74S175 family. The power source is powered by 5V. In terms of electronic devices, this device belongs to the Sfamily of devices. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. The 20mA output current allows it to be designed with the greatest amount of flexibility. It is designed with 2 output lines. Currently, there are 3 lines of input.
SN74S175NSR Features
Tape & Reel (TR) package
74S series
16 pins
5V power supplies
SN74S175NSR Applications
There are a lot of Texas Instruments SN74S175NSR Flip Flops applications.
- Data storage
- CMOS Process
- Set-reset capability
- Clock pulse
- Latch
- Registers
- Storage Registers
- Bounce elimination switch
- Supports Live Insertion
- Frequency Divider circuits
