SN74S74DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74S |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74S74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Output Current | 20mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6 ns |
| Family | S |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74S74DR Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. There is a Differentialoutput configured with it. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. In this case, the operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74S series. You should not exceed 110MHzin the output frequency of the device. A total of 2 elements are present. As a result, it consumes 25mA quiescent current and is not affected by external forces. Terminations are 14. If you search by 74S74, you will find similar parts. It is powered by a voltage of 5V . In terms of electronic devices, this device belongs to the Sfamily of devices. There is an electronic component mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 5Vvolts of power. It offers maximum design flexibility with its output current of 20mA. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74S74DR Features
Tape & Reel (TR) package
74S series
14 pins
5V power supplies
SN74S74DR Applications
There are a lot of Texas Instruments SN74S74DR Flip Flops applications.
- Single Down Count-Control Line
- Counters
- Buffered Clock
- Data Synchronizers
- Automotive
- Latch-up performance
- CMOS Process
- Bounce elimination switch
- Matched Rise and Fall
- Power down protection
