SN75115N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 75000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | OPEN-COLLECTOR OR TOTEM-POLE OUTPUT |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75115 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/2 |
| Interface Standard | GENERAL PURPOSE |
| Receive Delay-Max | 75 ns |
| Transmit Delay-Max | 75 ns |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 2 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75115N Overview
LED drivers with the enhanced 16-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.The Tube package contains this receiver.Since this part is a Receiver can transceiver, a number of solutions have been able to utiliReceivere it for various purposes.A Through Hole-type PCB or development board can be used to place this wide receiver.Power supply for this differential driver is 4.75V~5.25V.At any one time, this electronic part can have up to 0/2 eligible receivers/drivers.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.An output voltage range of 5V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.SN75115 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.The driver IC has improved power dissipation control.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.Driver ICs such as this one are designed to operate from 5V power sources.In addition to that, it contains 2 receivers as well.The integrator circuit is embedded with 0 drivers.In addition, the optical transceiver module incorporates a OPEN-COLLECTOR OR TOTEM-POLE OUTPUT function that improves the overall stability and accuracy of the signal management.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 50mA.An enhanced power-saving technique is implemented in this integrating circuit, whintegrating circuith is one of the 75000 series.
SN75115N Features
Tube package
16 pin count
16 pins
5V power supply
75000 series
SN75115N Applications
There are a lot of Texas Instruments SN75115N Drivers/Receivers/Transceivers applications.
- Ethernet circuitry
- Fiber-to-the-desktop
- Shortwave receiver
- Wireless projection application for conferences
- Routers
- Wireless 3D game
- Bar, KTV wireless entertainment
- Wired telephone
- Precision geodetic measurement
- Optical sub-assembly (OSA)
